P2026 EVAP Fuel Vapor Temp Sensor Circuit Low

Description and meaning of DTC p2026

This is a generic powertrain diagnostic trouble code (DTC) and typically applies to OBD-II vehicles. That may include but is not limited to vehicles from Mercedes Benz, VW, Audi, Subaru, Chevy, Dodge, BMW, Suzuki, Hyundai, Sprinter, etc. Anecdotally this code seems to be more commonly found on Mercedes-Benz vehicles. Although generic, the exact repair steps may vary depending on year, make, model and powertrain configuration. The Evaporative emissions (EVAP) system was introduced to vehicles for a few different reasons. Some of those included but are not limited to: reduced emissions expelled, slightly improved fuel efficiency, containing otherwise wasted fuel vapors. Not to mention consistently recycling unused/unburned fuel, pretty efficient isn't it?That being said, the EVAP system requires a multitude of sensors, switches, and valves in order to maintain desired emissions. The ECM (Engine Control Module) actively monitors these and adjusts them according to system needs. Just as the name implies, the fuel vapor temperature sensor is used by the ECM to monitor the temperature of those unburned vapors that would otherwise be expelled to the atmosphere. It is important to note that the EVAP system uses mostly plastic components to deliver the unburned fuel vapors to the engine to be burnt. You can imagine what kind of issues can occur when you expose plastic to the elements 24/7. Especially in particularly harsh winter conditions, these plastic components tend crack/split/break/clog. Food for thought. The check engine light gets activated with P2026 and associated codes P2024, P2025, P2027, and P2028, when the ECM recognizes one or more electrical values missing and/or outside of a specific range within the EVAP fuel vapor temperature sensor or in one of the circuits involved. Hard to say wether this would be mechanical or electrical, the thing to keep in mind is, the overall health of the system involved, in this case, the EVAP system, is and always should be the priority. Code P2026 is active when the actual sensor/circuit voltage is lower then desired when the ECM compares it to desired or expected values.

p2026 diagnostic trouble code symptoms

Symptoms of a P2026 trouble code may include:Failed state/provincial emission testCEL (check engine light) onSlight decrease in fuel efficiencyFuel smellPossible abnormal fuel filling symptoms (lengthy fill ups, cannot pull trigger on gas pump fully, etc. )

DTC p2026 - possible causes

Causes for this P2026 fuel trim code may include: Defective EVAP (Evaporative emissions) fuel vapor temperature sensorObstruction/leak within system causing sensor to perform out of range (mainly P2025)Broken or damaged EVAP fuel vapor temperature sensor wiring harnessWire shorting to powerExcessive resistance within the circuitECM (Engine Control Module) issuePin/connector problem. (corrosion, melting, broken lock tab etc. . )

How to fix OBD-II diagnostic trouble code p2026

More OBD-II diagnostic trouble codes (DTC)